Table of Contents
Advertisement
INDOOR UNIT DISPLAY SETTING
Allows the indoor unit to display of the temperature and power indicators on its front panel.
Press the LIGHT button (
The symbol "
" will appear on the display screen of the remote control. Press the button again to turn off
the display.
ENERGY-SAVING FUNCTION
Allows the indoor unit to automatically adjust the set temperature based on factory setting to achieve the
best energy saving performance.
While in Cooling mode, press the TEMP ( ) and CLOCK (
trol to activate the function. The temperature display of the remote control will show "
buttons simultaneously again to deactivate the Energy-Saving function.
NOTES :
▪ When Energy-Saving is active, the set temperature cannot be adjusted and the fan speed is auto-
matically set to Auto speed and cannot be changed. Pressing the TURBO button (
signal being sent.
▪ The Sleep and Energy-Saving functions cannot operate concurrently. If Energy-Saving has been pre-
viously set, activating Sleep mode will automatically cancel the Energy-Saving function. Conversely, if
a Sleep mode has been previously set, activating the Energy-Saving function will automatically cancel
the Sleep function.
8 °C HEATING FUNCTION
Allows the indoor unit to automatically start heating operation to maintain an indoor ambient temperature of
8 °C (46 °F) to prevent property damage when the user is absent for an extended period of time.
While in Heating mode, press the TEMP ( ) and CLOCK (
to activate the function. The symbol "
temperature indicator will show "
Heating function.
NOTES :
▪ When 8 °C Heating is active, the set temperature cannot be adjusted and the fan speed is automat-
ically set to Auto speed and cannot be changed. Pressing the TURBO button (
signal being sent.
▪ The Sleep and 8 °C Heating functions cannot operate concurrently. If 8 °C Heating has been previously
activated, activating Sleep mode will automatically cancel the 8 °C Heating function. Conversely, if a
Sleep mode has been previously set, activating the 8 °C Heating function will automatically cancel the
Sleep function.
▪ If the temperature measuring unit has been set to Fahrenheit, the temperature indicator of the remote
control will show "
16
OPERATION GUIDE
) on the remote control to turn on the display of the indoor unit's front panel.
" will appear on the display screen of the remote control and the
". Press the same buttons simultaneously again to deactivate the 8 °C
" instead of "
".
) buttons simultaneously on the remote con-
) buttons simultaneously on the remote control
". Press the same
) will result in no
) will result in no
Advertisement
Table of Contents
