Gree LOMO 17 GWC09QB-D3DNA5J/I Operation Manual page 15

SLEEP MODE
Allows the unit to use a preset sleep curve.
Press the SLEEP button (
on the display screen of the remote control. Pressing the button again will deactivate the Sleep function.
I FEEL FUNCTION
Allows the user to use the remote control as the primary temperature sensor in order for the indoor unit to
provide better comfort based on the location of the user and remote control.
Press the MODE button (
function. The symbol "
mote control will transmit the ambient temperature measured at its location to the indoor unit and the unit will
automatically adjust its operation in accordance to the transmitted temperature. Pressing the button again
will deactivate the I Feel function.
Once activated, the user should keep the remote control in close proximity for the function to be effective.
The remote control should also be kept within an area where the indoor unit can receive its signal. Do not
place the remote control near high temperature appliances or devices to avoid measuring an inaccurate
ambient temperature.
TEMPERATURE DISPLAY SETTING
Allows the user to select the type of temperature displayed on the indoor unit's front panel.
Press the TEMP button ( ) on the remote control to select the desired type of temperature display. With
each press of the button, the setting options cycle through in the following order :
NOTES :
▪ The outdoor ambient temperature parameter "
do not have this option, if selected, the indoor unit will display the indoor ambient temperature.
▪ When there is no symbol on the remote control display screen, setting is the same as "
▪ By default, the indoor unit displays the set temperature when it is turned on.
▪ When choosing to display the indoor or outdoor ambient temperature, the temperature indicator of the
indoor unit will show the corresponding temperature and, after three or five seconds, will automatically
switch to displaying the set temperature.
OPERATION GUIDE
) on the remote control to activate the function. The symbol "
) and arrow button " ▲ " simultaneously on the remote control to activate the
" will appear on the display screen of the remote control. Once activated, the re-
Set temp.
No display
Indoor Outdoor
ambient temp. ambient temp.
" is only available for some models. On models that
" will appear
".
15