Table of Contents
Advertisement
TIMER SETTING
SWITCH-ON TIMER
Allows the user to set a switch-on timer. The unit will switch on once the start delay has been reached.
Press the TIMER-ON button (
mote control will disappear and the word " ON " will start blinkling. Use the arrow buttons (▲ or ▼) to set the
desired time. Each press of either button increases or decreases the time by 1 minute. Holding either button
down for more than 2 seconds will cause the minutes to scroll up or down more quickly. Once completed,
press the TIMER-ON button (
screen and the word " ON " will stop blinking.
To cancel a switch-on timer that has been set, press the TIMER-ON button (
SWITCH-OFF TIMER
Allows the user to set a switch-off timer. The unit will stop running when the set operating time has elapsed.
Press the TIMER-OFF button "
mote control will disappear and the word " OFF " will start blinkling. Use the arrow buttons (▲ or ▼) to set the
desired time. Each press of either button increases or decreases the time by 1 minute. Holding either button
down for more than 2 seconds will cause the minutes to scroll up or down more quickly. Once completed,
press the TIMER-OFF button "
screen and the word " OFF " will stop blinking.
To cancel a switch-off timer that has been set, press the TIMER-OFF button "
NOTES :
▪ A switch-on and switch-off timer can be active concurrently.
▪ Before setting a timer, ensure that the system clock has been set to current time.
▪ Once the clock is set, the heat pump will turn on or off when the delay elapsed. When the unit is under a
timer setting, the POWER button (
use the remote control to cancel it.
▪ During timer setting, if no operation is performed for 5 seconds, the setting is canceled.
WIFI FUNCTION
Allows the user to control the unit remotely from their smartphone or tablet using the GREE+ App.
Press the WIFI button (
the display screen of the remote control. Holding down the WIFI button (
deactivate the WiFi function.
Holding down the MODE (
module to factory settings.
NOTE : This function is only available for some models.
14
OPERATION GUIDE
) on the remote control. The symbol "
) to confirm the timer setting. The symbol "
" on the remote control. The symbol "
" to confirm the timer setting. The symbol "
) will have no effect on operation. If the timer is no longer needed,
) on the remote control to activate the function. The word " WiFi " will appear on
) and WIFI (
) buttons simultaneously for 1 second will restore the WiFi
" on the display screen of the re-
" will reappear on the display
) on the remote control.
" on the display screen of the re-
" will reappear on the display
" on the remote control.
) for at least 5 seconds will
Advertisement
Table of Contents
