Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for LINOVISION IOT-S500DCS
Summary of Contents for LINOVISION IOT-S500DCS
- Page 1 IOT-S500DCS LoRaWAN® Magnet Contact Switch Updated on Dec.9, 2021...
- Page 2 Safety Precautions Linovision will not shoulder responsibility for any loss or damage resulting from not following the instructions of this operating guide. ❖ The device must not be remodeled in any way. ❖ In order to protect the security of the device, please change device the password when first configuration.
- Page 3 Revision History Date Doc Version Description Apr. 13, 2021 V 1.0 Initial version J une 30, 2021 V 1.1 Delete power button features 1. Add LoRa D2Dcontroller feature; 2. Delete low power alarm interval, device Dec.9, 2021 V 1.2 only uplinks once when battery level is lower than 10%.
-
Page 4: Table Of Contents
Contents 1. Product Introduction ............................ 5 1.1Overview .............................. 5 1.2Features ...............................5 2. HardwareIntroduction..........................5 2.1Packing List ............................5 2.2HardwareOverview ..........................6 2.3LED Patterns............................6 2.4Dimensions............................6 3. OperationGuide .............................7 3.1NFC Configuration..........................7 3.2LoRaWAN Settings..........................8 3.3GeneralSettings..........................10 3.4LoRa D2DSettings..........................1 1 3.5Maintenance ............................. 1 2 3.5.1Upgrade...........................12 3.5.2Backup ............................ -
Page 5: Product Introduction
IOT-S500DCS can be easily mounted on the doors, panes, or cabinets, greatly providing real applications for smart homes, smart offices or smart factories. -
Page 6: Hardwareoverview
2.2 Hardware Overview Sensor: Magnet: 2.3 LED Patterns Function Action LED Indicator Switch On/Off(network unregistered) Red, blink once Door/Window Status Switch On/Off(network registered) Green, blink once Send join network requests Red, blink once Network Status J oined the network successfully Green, blink twice The device is un-installed(tamper is detected) Red, blink once... -
Page 7: Operationguide
2) If the smartphone fails to read/write configurations via NFC, keep the phone away and back to try again. can also be configured by ToolBox software via a dedicated NFC reader provided by Linovision IoT, you can also configure it via TTL interface inside the device. -
Page 8: Lorawan Settings
3.2 LoRaWAN Settings ® LoRaWAN settings are used for configuringthe transmission parameters in LoRaWAN network. Basic LoRaWAN Settings: Go to Device->Setting->LoRaWANSettings of ToolBox App to configure join type, App EUI, App Key and other information. You can also keep all settings by default. Parameters Description Device EUI... - Page 9 1) Please contact sales for device EUI list if there are many units. 2) Please contact sales if you need random App keys before purchase. 3) Select OTAA mode if you use Linovision IoT cloud to manage devices. 4) Only OTAA mode supports rejoin mode.
-
Page 10: Generalsettings
Go to Device->Setting->GeneralSettingsof ToolBox App to change the reporting interval, etc. Parameters Description Reporting interval of magnet, tamper and battery level to network server. Default: 1080mins, Range: 1 -1080 mins Reporting Interval Note: IOT-S500DCS will also transmit alarm when magnet status is changed or... -
Page 11: Lora D2Dsettings
Change the password for ToolBox App to write this device. 3.4LoRa D2DSettings LoRa D2D protocol is developed by Linovision and used for setting up transmission among Linovision devices without gateway. When the LoRa D2D setting is enabled, IOT S500DCScan work as a LoRa D2D controller to send control commands to trigger LoRa D2Dagent devices. -
Page 12: Maintenance
2) Only Android version ToolBox supports the upgrade feature. 3.5.2Backup IOT-S500DCS supports configuration backup for easy and quick device configuration in bulk. Backup is allowed only for devices with the same model and LoRa frequency band. 1. Go to “Template” page on the App and save current settings as a template. You can also edit the template file. -
Page 13: 3Reset To Factory Default
Note: Slide the template item left to edit or delete the template. Click the template to edit the configurations. 3.5.3Reset to Factory Default Please select one of the following methods to reset device: Via Hardware: Hold on the reset button inside the device for more than 10s. After reset complete, the indicator will blinkin green twice and device will reboot. -
Page 14: Installation
4. Installation 3M Tapes Fix: Tear the 3M tapes of both parts, then make sure the magnet part is placed inside the door (portable part) and sensor is inside the door frame (fixed part). For double doors, put every part on each door. -
Page 15: Devicepayload
Channel 3 1 Byte 1 Byte N Bytes 1 Byte 1 Byte M Bytes 1 Byte 5.1Basic Information IOT-S500DCS reports basic information of sensor whenever joiningthe network. Channel Type Description 01(Protocol Version) 01=>V1 08 (Device SN) 12 digits 09 (Hardware Version) 01 40 =>V1.4... -
Page 16: Sensor Data
Channel Type Value (Tamper (Un-installed) Status) 5.3 Downlink Commands IOT-S500DCS supports downlinkcommands to configure the device. The application port is 85 by default. Channel Type Description 03 (Set Reporting Interval) 2 Bytes, unit: s Example: Set reporting interval as 20 minutes.