LINOVISION IOT-S500DCS Quick Start Manual page 2

Lorawan@ magnet contact switch
Hide thumbs Also See for IOT-S500DCS:
Table of Contents

Advertisement

Safety Precautions
Linovision will not shoulder responsibility for any loss or damage resulting from not following
the instructions of this operating guide.
The device must not be remodeled in any way.
In order to protect the security of the device, please change device the password when first
configuration. The default password is 123456.
Do not place the device close to objects with naked flames.
Do not place the device where the temperature is below/above the operating range.
Make sure electronic components do not drop out of the enclosure while opening.
When installing the battery, please install it accurately, and do not install the reverse or
wrong model.
The device must never be subjected to shocks or impacts.
Declaration of Conformity
IOT-S500DCS
is in conformity with the essential requirements and other
relevant provisions of the CE, FCC, and RoHS.
Copyright© 2011-2022Linovision All rights reserved.
For assistance, please contact
Linovision technical support:
Email: sales@Linovision.com
Tel: +86571-86708175
2

Advertisement

Table of Contents
loading

Table of Contents