Table of Contents
Advertisement
If frequency is one of CN470/AU915/US915, you can enter the index of the channel that you
want to enable in the input box,making them separated by commas.
Examples:
1, 40: Enabling Channel 1 and Channel 40
1-40:Enabling Channel 1 to Channel 40
1-40,60:Enabling Channel 1 to Channel 40 and Channel 60
All: Enabling all channels
Null: Indicates that all channels are disabled
Note:
For -868Mmodel, default frequency is EU868;
For -915Mmodel, default frequency is AU915.
3.3 General Settings
Go to Device->Setting->GeneralSettingsof ToolBox App to change the reporting interval, etc.
Parameters
Reporting interval of magnet, tamper and battery level to network server.
Default: 1080mins, Range: 1 -1080 mins
Reporting Interval
Note: IOT-S500DCS
Description
will also transmit alarm when magnet status is changed or
10
Advertisement
Table of Contents
