Table of Contents
Advertisement
3.2 LoRaWAN Settings
LoRaWAN settings are used for configuringthe transmission parameters in LoRaWAN
Basic LoRaWAN Settings:
Go to Device->Setting->LoRaWANSettings of ToolBox App to configure join type, App EUI, App
Key and other information. You can also keep all settings by default.
Parameters
Device EUI
Unique ID of the device which can also be found on the label.
App EUI
Default App EUI is 24E124C0002A0001.
Application Port
The port used for sending and receiving data, default port is 85.
J oin Type
OTAA and ABP modes are available.
Application Key
Appkey for OTAA mode, default is 5572404C696E6B4C6F52613230313823.
Device Address
DevAddr for ABP mode, default is the 5
Network Session
Nwkskey for ABP mode, default is 5572404C696E6B4C6F52613230313823.
Description
th
th
to 12
digits of SN.
®
network.
8
Advertisement
Table of Contents
