10 Troubleshooting
Checking procedure for main parts
10.4.2 RSW, DSWs and LEDs functions RAS-(4-6)HV(R/N)(C/P)2E
10.4.2.1 Location of print circuit boards (PCBs)
3
2
1
10.4.2.2 Purpose
Symbol
PCB
Control and
PCB1
Inverter PCB
PCB2
DSW-PCB
PCB3
Fan PCB
DCL
Reactor
316
SMGB0136 rev.0 - 07/2021
1
PCB3
TB
PCB2
1. Transmission between the indoor and outdoor units.
2. Processing for sensor input.
3. Processing for dip switch input.
4. Operation control for parts 1 to 3. Compressor operating control, control of the bypass
valve, fan control and overcurrent control.
5. Processing of the safety device input.
6. Processing of the relay output.
7. Detection of reverse phase for power source.
1. 7-segment display indication.
2. Transmission dip switch input to PCB1.
Drive Fan1 Motor.
Used for the Power Factor Correction.
2
DCL
Purpose
3
PCB1