General Specification - TensCare sports TENS 2 Instructions For Use Manual

22.

GENERAL SPECIFICATION

Waveform
Amplitude (over 1 kOhm load)
Output plug
Channels
Batteries
Weight
Dimensions
Safety Classification
Environmental specifications:
Operating:
Storage:
TYPE BF
EQUIPMENT
IP22
Note: The electrical specifications are nominal and subject to variation from the listed values
due to normal production tolerances of at least 5%.
Asymmetrical rectangular bi-phasic
99 mA zero to peak +ve in 99 steps +/- 10%
Fully shielded: touch proof
Dual channel
BL-6F Li-Ion battery 3.7V 1100mAh
95 g without batteries
114 x 56 x 23 mm
Internal power source.
Designed for continuous use.
No special moisture protection.
Temperature range: 5 to 40⁰C
Humidity: 15 to 93% RH non-condensing
Atmospheric pressure: 700 hPa to 1060 hPa
Temperature range: -25 to +70⁰C
Humidity: Up to 93% RH non-condensing
Equipment providing a degree of protection against electric
shock, with isolated applied part.
This symbol on the unit means "Refer to Instructions for use".
The unit is not water resistant, and should be protected from
liquids.
Complies with EU WEEE regulations
38