Ast008C - ClimateMaster ATM11C11 Submittal Data

Remote/Outdoor Temperature Sensor
Application:
The AST008C sensor is a thermistor, used as an accessory
for thermostat models ATP32U03C and ATP32U04C. This
sensor provides outdoor air temperature information for
the control system, as well as an indication of outdoor
temperature on the display screen. The AST008C sensor
can also be used as a remote indoor sensor. Two sensors
may be used--one for remote indoor temperature
sensing, and one for outdoor temperature sensing. When
the sensor is used as a remote indoor temperature sensor,
the internal sensor of the thermostat becomes inactive.
(No thermostat reconfi guration required).
Features:
• Designed for indoor or outdoor installation.
• May be used as indoor remote temperature sensor or
as outdoor temperature sensor.
ClimateMaster works continually to improve its products. As a result, the design and specifi cations of each product at the time of order may be changed without notice and may not be as described herein. Please contact ClimateMaster's Customer
Service Department at 1-405-745-6000 for specifi c information on the current design and specifi cations. Statements and other information contained herein are not express warranties and do not form the basis of any bargain between the parties,
but are merely ClimateMaster's opinion or commendation of its products. The latest version of this document is available at climatemaster.com.
LC204 - 11
Thermostat Submittal Data
Specifi cations:
• Two-wire connection to thermostat, extendable with
two-conductor 22 AWG thermostat wire up to 200 feet.
• Mounting clip included
Wiring:

AST008C

(i.e. in return
Rev.: 28 February, 2013
ATP32U0_
Thermostat
Terminal Block
–
–
GND
AST008C
OD
ID
GND
Position
Sensor
Indoor
air duct)
Eng/I-P
AST008C
Position
Sensor
Outdoor
Page ______ of ______