ClimateMaster ATA11H01 Installation Instructions

Use form 69-0959 except use Table 2 and the hookup diagrams that follow.
Mode Number
(Press i key
to change)
Select
Not used 01
Fan operation 02
Not used 03
Heating cycle 04
rate
Not used 05 thru 11
Changeover 12
(T8501D only)
Not used 13
Degree 14
temperature
display
Not used 15 thru 18
Extended fan 19
operation in
a
heating
Extended fan 20
operation in
cooling
Not used 21 thru 23
Outdoor 24
temperature
display
a Mode 02 must be set to 01 to extend fan operation.
®U.S. Registered Trademark
Microelectronic Thermostat
Table 2. Thermostat installer setup options.
Factory-Setting
Display Description
— —
01 Heat pump and electric
heat applications where
thermostat controls fan
operation in heat mode.
— —
03 3 cph used for
conventional systems
— —
00 Automatic changeover
— —
00 Temperature is
displayed in °F
— —
01 Fan operation is
extended 90 seconds
after the call for heat
ends.
01 Fan operation is
extended 90 seconds
after the call for cool
ends
— —
00 No outdoor temperature
is displayed
ATA11H01
INSTALLATION INSTRUCTIONS
Other Choices
(Press or key to change)
Display Description
— —
00 Conventional applications where
equipment controls fan operation
in heat mode.
— —
01, 06, 01—1 cph used for radiant floor
or 09 heat, gravity systems
06—6 cph used for conventional
systems.
09—9 cph used for electric heat
systems
— —
01 Manual changeover
— —
01 Temperature is displayed in °C
— —
00 No extended fan operation after
the call for heat ends
00 No extended fan operation after
the call for cool ends
— —
01 Outdoor temperature is displayed.
Needs a C7089B1000 Outdoor
Sensor to operate.
T8501D1087
(continued)
69-1312-1