Storage Mode Configuration - Speco N8NRE User Manual

Record & Disk Management NVR User Manual
e. Select a hot spare. In the physical disk interface, select the disk that is not in the array and click as shown in the following pictures.
⚫
RAID Rebuilding
If one of your disks is defective, the disk indicator on the front panel will turn red. A warning tip will pop up if the relevant HDD exception alarm is
set. You need to rebuild your RAID configuration after you replace the broken disk with a new one.
Click the above circled icon and then select the physical disk to rebuild.

7.4.2 Storage Mode Configuration

Click Start→Settings→Disk→Storage Mode to go to the interface as shown below.
40