Task Settings; Smart Tracking - Speco N8NRE User Manual

PTZ
➢
Play or Stop Trace
Select the trace and click to play the trace; click
➢
Modify the Trace Name
On the left panel, enter new trace name and click
➢
Delete the Trace
Click to delete the trace. Or put the cursor on the trace name (right panel) and then
click it to delete this trace.

6.6 Task Settings

Click Start→Settings→Camera→PTZ→Task to go to the interface as shown below.
① Select a PTZ camera.
② Select function, such as preset, cruise, trace, random scanning, etc.
③ Select a name, such as preset name, cruise name, etc.
④ Select the start and end time.
⑤ Click "Add" to add the task.
⑥ Click
to extend the tasks of the PTZ camera. Click
start the specific task at the specified time.

6.7 Smart Tracking

This function is only available with Speco Technologies' AI PTZ cameras. Please add an AI PTZ camera to the NVR for this function to take effect.
Smart Tracking: When people or vehicles cross the alarm line or intrude the predefined area, the PTZ camera can automatically track them and the
to stop the trace.
to modify and save the trace name.
beside "Enable" to enable the task. After the task is enabled, the PTZ camera will
32
NVR User Manual
will appear on the right corner of the trace name;