Setup - Storage Mode - Speco N8 User Manual

4-8. Setup – STORAGE Mode
In the SETUP menu, select the STORAGE tab. Then, the STORAGE menu is displayed as pictured below.
Navigate through the menu items or change the settings using the mouse or the remote control.
Item
OVERWRITE
DISK FORMAT
DISK INFO
Figure 4.8.1. STORAGE Setup Screen
Table 4.8.1. Menu Items in STORAGE Setup Screen
When enabled, the NS will continue recording and overwrite the oldest existing
recorded data once the hard drive is full. When disabled, recording will stop once
the hard drive is full.
Once clicked, the user will have to confirm to format the Hard Drive.
After confirming, the NS will reboot, and the format sequence will load.
The format sequence allows user to select which HDDs to format.
Caution: It is recommended to archive any data that you may need in the
future before formatting the hard drive.
Hard drive information.
Displays the following information:
Description
46