Cloud Upgrade; Platform Access - Speco N8NRE User Manual

Device Management
Check "Enable" and then select the NAT server address. Click "Apply" to save your settings.
You can scan the QR Code on the Speco Blue app installed on a mobile phone or tablet PC to quickly add the device to the server list of the mobile
app.
Access Type: NAT or NAT2.0 can be selected.
Click "Advanced" to select the area as needed.
Note:
1. If you want to use the cloud upgrade, Speco Blue app, P2P web access or advanced browser features, you must enable NAT2.0.
2. After the NAT is enabled, use the Speco Blue app to scan the QR code. The device will be added to the server list of the Speco Blue app.
3. The device can be added to the account of the Speco Blue app only when NAT2.0 is enabled. After NAT2.0 is enabled, when you add the device to
the account of the Speco Blue app, you must enter the security code of the device here.
After the device is bound to the account of the mobile app, the blue binding information will be shown under the QR code. Click this blue information
to unbind it.

14.1.9 Cloud Upgrade

Note: Before you use cloud upgrade, please enable NAT2.0.
① Click Start→Settings→Network→Cloud Upgrade as shown below.
② Select "Accept Notification Only" or click "Check for Updates" to check whether the current version is the latest. If your software version is not
the latest, click "Upgrade" to download and upgrade from the cloud server.
③ Please don't power off during the upgrade process.
④ Only users with Network user authority can activate and use this feature. If the dealer does not wish to provide this capability to their users,
they can ensure that only the main Admin login has network authority.

14.1.10 Platform Access

Some models may not support this function.
This function is mainly used for connecting ECMS/NVMS. The setup steps are as follows:
Click Start→Settings→Network→Integration→Platform Access to go to the interface.
102
NVR User Manual