Cli Example; Example #1: Enable Routing For The Switch - NETGEAR ProSafe FSM7328S Administration Manual
Managed switch
Hide thumbs
Also See for ProSafe FSM7328S:
- User manual (402 pages) ,
- Hardware installation manual (40 pages) ,
- Operating instructions manual (24 pages)
Table of Contents
Advertisement
NETGEAR 7000 Series Managed Switch Administration Guide
CLI Example
The configuration commands used in the following example enable RIP on ports 1/2/2 and 1/2/3 as
shown in the network illustrated in
Figure 5-4
Example #1: Enable Routing for the Switch:
The following sequence enables routing for the switch:
(Netgear Switch) #config
(Netgear Switch) (Config)#ip routing
(Netgear Switch) (Config)#exit
5-16
Figure 5-4
v1.0, March 2006
IP Routing Services
Advertisement
Table of Contents
