Example #2: Assign Ports To Vlan2; Example #3: Assign Ports To Vlan3 - NETGEAR ProSafe FSM7328S Administration Manual

Example #2: Assign Ports to VLAN2

This sequence shows how to assign ports to VLAN2, specify that frames will always be
transmitted tagged from all member ports, and that untagged frames will be rejected on receipt.
0(Netgear Switch) #config
(Netgear Switch) (Config)#interface 0/1
(Netgear Switch) (Interface 1/2/1)#vlan participation include 2
(Netgear Switch) (Interface 1/2/1)#vlan acceptframe vlanonly
(Netgear Switch) (Interface 1/2/1)#exit
(Netgear Switch) (Config)#interface 1/2/2
(Netgear Switch) (Interface 1/2/2)#vlan participation include 2
(Netgear Switch) (Interface 1/2/2)#vlan acceptframe vlanonly
(Netgear Switch) (Interface 1/2/2)#exit
(Netgear Switch) (Config)#vlan port tagging all 2
(Netgear Switch) (Config)#exit

Example #3: Assign Ports to VLAN3

This example shows how to assign the ports that will belong to VLAN 3, and to specify that
untagged frames will be accepted on port 1/2/4.
Note that port 1/2/2 belongs to both VLANs and that port 1/2/1 can never belong to VLAN 3.
(Netgear Switch) #config
(Netgear Switch) (Config)#interface 1/2/2
(Netgear Switch) (Interface 1/2/2)#vlan participation include 3
(Netgear Switch) (Interface 1/2/2)#exit
(Netgear Switch) (Config)#interface 1/2/3
(Netgear Switch) (Interface 1/2/3)#vlan participation include 3
(Netgear Switch) (Interface 1/2/3)#exit
(Netgear Switch) (Config)#interface 1/2/4
(Netgear Switch) (Interface 1/2/4)#vlan participation include 3
(Netgear Switch) (Interface 1/2/4)#exit
(Netgear Switch) (Config)#interface 1/2/4
(Netgear Switch) (Interface 1/2/4)#vlan acceptframe all
(Netgear Switch) (Interface 1/2/4)#exit
(Netgear Switch) (Config)#exit
Virtual LANs
NETGEAR 7000 Series Managed Switch Administration Guide
v1.0, March 2006
3-3