Positioning Cookware - Miele KM 7678-2 FL Operating And Installation Instructions

Operation

Positioning cookware

You can use a maximum of 6 pans at
the same time on this cooktop.
Useful tips
- You can position the pans anywhere
on the useable surface of the
cooktop.
- We recommend switching the
cooktop on first and then placing the
pans on it. If you do this, the pans will
be detected more quickly by the
cooktop.
- If you are using several pans at once,
position them as far apart as
possible. This will enable the cooktop
to recognise each of them
individually.
- Move pans on the cooktop one after
the other, not all at the same time.
- When you move a pan on the
cooktop, the associated numerical
keybank lights up. The set power
level "goes along" with it.
- Pans with a base diameter between
100 and 145 mm will not be detected
in every position on the cooktop.
32
Possible faults
You place a pan on the cooktop and the
associated numerical keybank does not
appear.
The pan cannot be detected in this
position because it is very small.
 Reposition the pan. If it is still not
detected, use a different pan.
There are several pans on the cooktop.
You place another pan on the cooktop
and the  symbol lights up.
The pans are too close together.
 Reposition the pans.
Move pans on the cooktop one after
the other, not all at the same time.
You reposition a pan and the set power
level starts to flash.
The pan cannot be detected.
 Touch the flashing power level.
 If the power level continues to flash,
reposition the pan.
You reposition a pan, the set power
level goes out and 0 lights up.
 Reset the power level.