Table of Contents
Advertisement
4. Install anchor baffle plates.
5. Remove the front cover of the power distribution subrack from the bypass cabinet, and remove
the rear covers from the bypass cabinet and its adjacent power cabinet.
7. (Optional) Remove the extension rod of the
6. Take off No. 10 protective plate.
maintenance bypass switch from the bypass cabinet.
Blue mark
When reinstalling the switch extension
rod, keep the dowel level, as shown in
the figure. Insert the switch extension
rod to the blue mark, put washers, and
tighten the dowel to reinstall the switch
extension rod.
4
Advertisement
Table of Contents
