Summary of Contents for Unfinished Furniture of Wilmington CANYON T-7840XT
Page 1
ASSEMBLY INSTRUCTIONS : 40X60X78 CANYON TABLE Description : T-7840XT AND T-7840XB Item No. ITEM NO : T-7840XT AND T-7840XB Printed in Vietnam ISSUED DEC 19, 2014 THIS ITEM IS PACKED IN 2 CARTONS - 1 -...
BEFORE ASSEMBLY Thank you for purchasing this quality product. This product has been designed for easy assembly and constructed for durability. All parts were checked prior to packaging to insure quality. Prior to beginning assembly, however, make sure all parts and hardware are included and free of obvious defect. If a part is missing or defective, please contact the store where purchased.
HARDWARE LIST When unpacking, please carefully not to discard any parts with the packaging. Before continuing, please make sure you have all of the following hardware: Description Sketch Description Sketch Bolt Lock Washer ( M8x50mm) (8.5 x13mm) Flat Washer Allen Key (8.5 x19mm) (4x80mm) NOTE: HARDWARE IS PACKED IN CARTON T-7840XB...
Page 4
STEP 2 Attach the cross bars (D) to top (A) and bases (C) with bolts (1), and washers (2) and (3), as shown below. Tighten with Allen key (4). STEP 3 Unlock the table top from both sides underneath the top as shown below. Pull the 2 parts of the table top apart.
Page 5
STEP 4 Place the leaf (B) in the center of the top as shown below. Push the table top closed. Lock the mechanism underneath 2 sides of the table top as shown below. ITEM NO : T-7840XT AND T-7840XB Printed in Vietnam ISSUED DEC 19, 2014 THIS ITEM IS PACKED IN 2 CARTONS - 5 -...