Menu For Programming The Drc-Mj D3 Hand-Held Transmitter Parame- Ters; P1.1 Activating The Menu - DEMAG DRC-MJ D3 User Manual

P1 Menu for programming the DRC-MJ D3 hand-held transmitter
parameters

P1.1 Activating the menu

Lift
F1
Left
Long travel to left
Horn
The "Hand-held transmitter parameter programming" menu can be used by
specially trained personnel for displaying and also partly changing the following
settings of the DRC-MJ D3 hand-held transmitter:
Parameter no. Description
501 S/N
502 SW version
503 HW version
504 -
505 Timeout in STOP mode
506 Timeout in RUN mode
507 Invert lifting/lowering
508 Electronic gate
509 Transmitter power output
510 Transmitter duty cycle
511 Information feedback rate
512 Listen before talk (LBT)
513 Vibration alarm
514 White background illumination
515 Activate WCB function
516 Adjust display contrast
000 Log off receiver
The menu can be activated in Run mode or STOP mode.
– Hold the STOP button down.
– Push the LIFT joystick.
– Push the LEFT joystick twice.
– Push the LIFT joystick and hold it down for approx. 5 seconds.
– Release the LIFT joystick.
– Release the STOP button.
Only the parameter number and the current parameter value are displayed when
the menu is first activated. The screen starts with parameter 301, i.e. the serial no.
of the DRC-MJ D3 hand-held transmitter:
Lower
F2
Long travel to right
Right
Stop
K564
301:
00000314
Edit
No
No
No
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Parameter no.
Parameter value
43605344.eps
43666944.eps
59