Creating Waveform Sequences (Multitouch Interface) - Keysight E6640A Getting Started Manual

Operating Tasks: Source Setup

Creating Waveform Sequences (MultiTouch Interface)

Creating Waveform Sequences (MultiTouch Interface)

Waveform Sequences (under ARB Setup) is used to create a sequence of
waveform files to be played in order:
1. Click Build New Sequence.
2. In the window which opens, click Insert Waveform (this opens a window
3. To add waveforms that are not shown in the table, use the Recall
4. When you have all the waveforms added, and you've made the desired
Figure 6-7 Waveform sequences (ARB Setup)
168
showing the waveforms that are in ARB memory. To add a waveform to the
sequence, select it and click OK. Repeat this process to add more.
Waveform function to load them into ARB memory.
settings for their repetitions and markers, click Save Sequence.
Getting Started Guide