INVENTOR PSB20070INL User Manual page 24

Although this appliance has automatic defrosting, a layer of ice may appear on the inside Although this appliance has automatic defrosting, a layer of ice may appear on the inside
walls of the freezer if you open the door frequently or keep it open for a long time. If the ice walls of the freezer if you open the door frequently or keep it open for a long time. If the ice
layer is very thick, select a time when the freezer is almost empty and proceed as follows: layer is very thick, select a time when the freezer is almost empty and proceed as follows:
1. Remove food and baskets, unplug the appliance, and leave the doors open. Ventilate the 1. Remove food and baskets, unplug the appliance, and leave the doors open. Ventilate the
room well to speed up the process. room well to speed up the process.
2. When defrosting is complete, clean the freezer as described above. 2. When defrosting is complete, clean the freezer as described above.
Warning! Warning!
• Do not use sharp objects to remove ice from the freezer. The appliance can only be • Do not use sharp objects to remove ice from the freezer. The appliance can only be
reconnected to the power supply and switched on after the interior is completely dry. reconnected to the power supply and switched on after the interior is completely dry.
Cleaning door seals
Cleaning door seals
Ensure that the door seals are kept clean. Sticky foods and drinks can cause the seals to Ensure that the door seals are kept clean. Sticky foods and drinks can cause the seals to
stick to the frame and tear when open the door. Wash the seals with a mild detergent and stick to the frame and tear when open the door. Wash the seals with a mild detergent and
lukewarm water. Rinse and dry them thoroughly after cleaning. lukewarm water. Rinse and dry them thoroughly after cleaning.
Warning! Warning!
The appliance can only be switched on again after the door seals are completely dry. The appliance can only be switched on again after the door seals are completely dry.
Replacing the LED lamp Replacing the LED lamp
Warning ! Warning !
The LED light must not be replaced by the user! If the LED light is damaged, contact the The LED light must not be replaced by the user! If the LED light is damaged, contact the
customer helpline for assistance. customer helpline for assistance.
24
24
EN
EN