Hardware Monitor Setup - BOSER Technology HS-7000 Manual

4.10 Hardware Monitor Setup

AMIBIOS SETUP – HARDWARE MONITOR SETUP
(C)2001 American Megatrends, Inc. All Rights Reserved
CPU Ratio Selection
*** System Hardware Monitor ***
Chassis Intrusion
Current CPU Temperature
Current System Temperature
Current CPU Fan Speed
Current Chassis Fan Speed
Current Power Fan speed
Vcore
Vtt
Vio
+ 5.000V
+12.000V
-12.000V
- 5.000V
Battery
+5V SB
System Hardware Monitor:
This field determines which component will detect the CPU
temperature. If your board comes with a provision for a thermal
connector, you may set this field as Thermistor. Otherwise, please
configure it as CPU (also default setting).
Current CPU Temperature:
This read-only field displays the current CPU temperature as
part of the hardware monitoring feature of your board.
Current System Temperature:
This field displays the current system and power supply
temperatures, if your computer contains a monitoring system.
The available choices are Both and Supervisor.
Current CPU/Chassis/Power FAN Speeds:
These fields display the current speed of up to CPU, chassis
(system) and Power supply fans, if your computer contains a
monitoring system.
Vcore/Vtt/Vio/-5V/-12V/+5V/+12V/Battery/+5V SB:
Once the hardware monitoring IC detects the current
voltages of voltage regulators and power supply unit, it shows
the values on these fields for read-only purposes.
8.0x
Disabled
ESC:Exit
PgUp/PgDn: Modify
F1:Help
:Sel
F2/F3:Color
45