BOSER Technology HS-7000 Manual page 43

3rd Boot Device:
This option sets the type of THIRD device from where the BIOS
will seek to boot from, if and when the 1st and 2nd Boot Devices
fail after AMIBIOS POST completes. The available settings are
Disabled, IDE-0, IDE-1, IDE-2, IDE-3, Floppy, ARMD-FDD,
ARMD-HDD, CDROM, and SCSI.
4th Boot Device:
This option sets the type of FOURTH device from where the BIOS
will seek to boot from, if and when the 1st, 2nd and 3rd Boot
Devices fail after AMIBIOS POST completes. The available
settings are Disabled, IDE-0, IDE-1, IDE-2, IDE-3, Floppy,
ARMD-FDD, ARMD-HDD, CDROM, and SCSI.
Try Other Boot Devices:
Set this option to Yes to instruct AMIBIOS to attempt to boot from
any other drive in the system. This is useful if the BIOS cannot find
a boot drive among the drives specified in the 1st /2nd/3rd/4th
Boot Devices. The available settings are Yes, and No.
Initial Display Mode:
This feature can control the display on/off settings of your OEM
full logo screen.
S.M.A.R.T. for Hard Disks:
Self-Monitoring, Analysis and Reporting Technology. This option
can help the BIOS in warning the user of possible device failure,
giving user a chance to back up the device before actual failure
happens. The available options are Enabled, and Disabled.
BootUp Num-Lock:
When set as On, this option turns off numeric lock when the
system is powered, allowing the end user to use the arrow keys on
both the numeric keypad and the keyboard.
Floppy Drive Seek:
Set this option to Enabled to specify that floppy drive A: will
perform a Seek operation at system boot. The available options
are Enabled, and Disabled.
PS/2 Mouse Support:
When this option is enabled, BIOS allows the system to support a
PS/2 type mouse. The available options are Enabled, and
Disabled.
37