Cmos Data Clear; Power And Fan Connectors - BOSER Technology HS-7000 Manual

3.16 CMOS Data Clear

The HS-7000 has a Clear CMOS jumper on JP1.
JP1: Clear CMOS
Normal Operation
Clear CMOS
The default setting of JP1 is short 2-3. Before you turn
IMPORTANT:
on the power of your system, please set JP1 to short
1-2 for normal operation.

3.17 Power and Fan Connectors

HS-7000 provides one 4-pin and one 20-pin ATX power connectors at
J2 and J1.
HS-7000 must using P4 power supply. One of 4-pin connector is for
+12V lead which should connect to J2.
20-pin ATX Power Connector can connect to Backplane or to J1. If
20-pin ATX Power Connector connect to Backplane, please make sure
CN27 and Backplane's 5-pin ATX controller is connected together!
J1: ATX Power Connector
PIN Description PIN Description
1 3.3V
GND
3
5 GND
7 GND
9 5Vsb
11 3.3V
13 GND
15 GND
GND
17
19 +5V
J2: 4-pin ATX Power Connector
PIN Description PIN Description
1 GND
3 12V
20
Options Settings
Short 1-2
Short 2-3
2 3.3V
+5V
4
6 +5V
8 PG
10 +12V
12 -12V
14 PS_ON
16 GND
-5V
18
20 +5V
2 GND
4 12V