Peripheral Setup - BOSER Technology HS-7000 Manual

4.9

Peripheral Setup

The IDE hard drive controllers can support up to two separate hard
drives. These drives have a master/slave relationship that is
determined by the cabling configuration used to attach them to the
controller. Your system supports two IDE controllers--a primary and a
secondary--so you can install up to four separate hard disks.
PIO means Programmed Input/Output. Rather than having the BIOS
issue a series of commands to affect the transfer to or from the disk
drive, PIO allows the BIOS to tell the controller what it wants and then
let the controller and the CPU perform the complete task by them. This
is much simpler and more efficient (also faster).
AMIBIOS SETUP – PERIPHERAL SETUP
(C)2001 American Megatrends, Inc. All Rights Reserved
OnBoard IDE
OnBoard LAN
OnBoard AC'97 Audio
OnBoard FDC
OnBoard Serial Port A
OnBoard Serial Port B
Serial Port B Mode
IR Duplex Mode
IR Pin Select
OnBoard Prarllel Port
Parallel Port Mode
EPP Version
Parallel Port IRQ
Parallel Port DMA Channel
OnBoard Midi Port
Mide IRQ Select
OnBoard Game Port
Keyboard PowerOn Function
Specific Key for Power On
Mouse PowerOn Function
OnBoard IDE/FDD:
Set this option to Enabled to activate the floppy drive controller on
the system board. The available settings are Auto (AMIBIOS
automatically determines if the floppy controller should be
enabled), Enabled, and Disabled.
Both Available Options:
Disabled Disabled
Auto Primary
Auto Secondary
3F8/IRQ4 Both
2F8/IRQ3
Normal
Full Duplex
SINB / SOUTB
378/IRQ7
Normal
N / A
Auto
N / A
Disabled
3
Disabled
Disabled ESC:Exit
N / A PgUp/PgDn: Modify
Disabled F1:Help
:Sel
F2/F3:Color
43