3.21 External Speaker
Aside from the buzzer at location BZ1 onboard, the HS-7000 also
offers a connector (CN1) for an external speaker connection. The table
below lists the pin assignments of CN1.
CN1: External Speaker Connector
PIN
Description
1
VCC
2
GND
3
GND
4
Speaker Signal
3.22 Watchdog Timer
Once the Enable cycle is active, a Refresh cycle is requested before
the time-out period. This restarts counting of the WDT period. When
the time counting goes over the period preset of WDT, it will assume
that the program operation is abnormal. A System Reset signal to
re-start when such error happens.
24