Table of Contents
Advertisement
Primary Display:
Select this option to configure the type of monitor attached to the
computer. The available settings are Monochrome, Color 40x25,
Color 80x25, VGA/PGA/EGA, and Absent.
Password Check:
This option enables the password check option every time the
system boots or the end user runs Setup. If set as Always, a user
password prompt appears every time the computer is tuned on. If
setup is chosen, the password prompt appears if BIOS is
executed.
Boot To OS/2:
Set this option to Enabled if running OS/2 operating system and
using more than 64MB of system memory on the system board.
The available options are Yes, and No.
L1 Cache:
This option enables or disables the internal cache memory of the
installed processor.
L2 Cache:
This option enables/disables the secondary cache memory of
your board. The available options are Enabled, and Disabled.
System BIOS Cacheable:
When this option is enabled, the System ROM area from
C000-DC00 is copied (shadowed) to RAM for faster execution.
C000,16k/C400,16k/C800,16k/ CC00,16k/D000,16k/D400,16k/D800,16k/
DC00,16k Shadow:
These options enable shadowing of the contents of the ROM area
named in the option title. The available settings are Enable
Disable, Cached. The ROM area that is not used by ISA adapter
cards will be allocated to PCI adapter cards.
Enabled
Video ROM area from C0000-C7FFF is copied
(shadowed) from ROM to RAM for faster execution.
Disabled
The contents of the video ROM are not copied to RAM
Cached
The contents of the video ROM area from
C0000h-C7FFFh are copied from ROM to RAM and can
be written to or read from cache memory.
38
Advertisement
Table of Contents
