Subscribe to Our Youtube Channel
Related Manuals for BOSER Technology Transmeta Crusoe HS-1600
Summary of Contents for BOSER Technology Transmeta Crusoe HS-1600
- Page 1 HS-1600 Transmeta Crusoe Mini Board • Crusoe CPU•CRT/Panel•SODIMM•DiskOnChip• •LAN•4COM•Mini PCI•IrDA •USB•Sound•Single +5V• •Transmeta Embedded Industrial Single Board Computer•...
- Page 2 Trademarks BOSER is a registered trademark of BOSER Technology Co., Ltd. ISB is a registered trademark of BOSER Technology Co., Ltd. Intel is a registered trademark of Intel Corporation.
-
Page 3: Table Of Contents
Contents HS-1600........................1 GENERAL INFORMATION..................3 1.1 M ....................4 AJOR EATURES 1.2 S ......................5 PECIFICATIONS 1.3 D ....................6 ELIVERY ACKAGE HARDWARE INSTALLATION................... 7 2.1 C ................7 AUTION OF TATIC LECTRICITY 2.2 C ........8 AUTION ON NPACKING AND EFORE NSTALLATION 2.3 HS-1600’ ....................9 AYOUT 2.4 Q... - Page 4 AWARD BIOS SETUP....................28 4.1 M ......................29 4.2 S CMOS S ..................30 TANDARD ETUP 4.3 A BIOS F ................31 DVANCED EATURES 4.4 I ..................32 NTEGRATED ERIPHERALS 4.5 P ................34 OWER ANAGEMENT ETUP 4.6 P P/PCI C ..............35 ONFIGURATION ETUP SOFTWARE UTILITIES ....................36 5.1 VGA D WIN98..............37 RIVER...
-
Page 5: General Information
Chapter-1 General Information The HS-1600 is a 66MHz Bus, Via VT86C686 chipset based Mini Embedded SBC with combined features to make it an ideal all-in-one industrial single board computer with enhanced I/O effects, LAN and VGA interface. With on board DMA33 IDE drive interface architecture, the HS-1600 supports a maximum of 33MB/sec data transfer rate with one IDE drive connection. -
Page 6: Major Features
1.1 Major Features Transmeta Crusoe TM3200 400MHz or TM5400 600MHz CPU Via VT82C686A Chipset One SODIMM socket supports up to 256MB Mini PCI Local Bus support Three RS-232 and one RS-232/422/485 serial ports include 16C550 UART with 16byte FIFO One enhanced bi-directional parallel port support SPP/ECP/EPP On board two USB ports and one IrDA port On board SMC 37C669 On board 69000 CRT/Panel display controller... -
Page 7: Specifications
1.2 Specifications ?? CPU: Transmeta Crusoe TM3200 400MHz / TM5400 600MHz CPU ?? Bus Interface: Mini PCI Local Bus ?? Memory: One SODIMM socket provides up to 256MB ?? Chipset: Via VT82C686 ?? Data Bus: 64bit ?? VGA: 69000 with 2MB memory support CRT/Panel display up to 1280x1024x256 colors ?? IDE: Two IDE disk drives support DMA33 transfer rate up to 33MB/sec ?? Floppy: Support up to one floppy disk drives... -
Page 8: Delivery Package
?? Operating Temperature: 0~60℃ ?? Board Size: 11.25x10.2 cm 1.3 Delivery Package The delivery package of HS-1600 includes the following items: ?? One HS-1600 Industrial Single Board ?? One Printer Ports Flat Cable ?? One COM port Flat Cable ?? One IDE port Flat Cable ?? One FDD port Flat Cable ?? One PS/2 Keyboard/Mouse Transfer Cable ?? One Panel connector Flat Cable... -
Page 9: Hardware Installation
Chapter-2 Hardware Installation This chapter provides the information on how to install the hardware of HS-1600. First, proceed with sections 1.3, 2.1 and 2.2 to check the delivery package and for unpacking. Afterwards, go to the jumpers setting section. 2.1 Caution of Static Electricity The HS-1600 has been well packaged with an anti-static bag to protect the sensitive computer components and circuitry from the damage of static electric discharge. -
Page 10: Caution On Unpacking And Before Installation
2.2 Caution on Unpacking and Before Installation First, proceed with the steps in section 2.1 to protect the HS-1600 from electricity discharge. Refer to section 1.3 in checking the delivery package again with the following steps: 1. Unpack the HS-1600, store all packing material, manual and any diskette. -
Page 11: Hs-1600' S Layout
2.3 HS-1600’ s Layout... -
Page 12: Quick Listing Of Jumpers And Connectors
2.4 Quick Listing of Jumpers and Connectors ? Mini PCI Slot ?P.26 ? Reset ?P.15 ? TDM Debug connector ? Panel Voltage select ?P.12 ? COM2 RS-232/422/485 select ?P.19 ? AUX In connector ?P.15 ? COM2 Enabled/Disable select ?P.19 ? AUX In ?P.15 ? Audio Out ?P.15... -
Page 13: Jumper Setting Description
2.5 Jumper Setting Description A jumper pin-set is ON as a shorted circuit with a plastic cap inserted over two pins. A jumper pin-set is OFF as an open circuit with a plastic cap inserted over one or no pin(s) between pins. Figure 2.2 shows examples of different jumper pin-set settings as ON or OFF in this manual. -
Page 14: Cmos Clean
All jumper pin-set has its default setting with the plastic cap inserted as ON, or without the plastic cap inserted as OFF. The default settings are referred to in this manual with a " * " symbol in front of the selected item. -
Page 15: Setting The Flat Panel Voltage
2.8 Setting the Flat Panel Voltage The HS-1600 provides a setting for the selection of the working voltage of individual flat panel by JP1 setting as follows: Flat Panel Voltage Selecting of JP1: Panel’s Working Voltage 5.0 V 3.3 V *2-3 Please contact your flat panel supplier to make sure a correct Panel’s Working Voltage. -
Page 16: Watchdog Timer
2.10 Watchdog Timer HS-1600 provides WDT functions of 10 seconds. Enable WDT in the 443H location. If there is no Read function in 10 seconds, the system will reset. To remove this function, use a software to read the 45H location. -
Page 17: Reset Button
3.2 Reset Button The HS-1600 has one Reset Button connection with JP1 JP1 : Reset Button PIN NO. Description Reset Single 3.3 Audio Setting The sound function of HS-1600 is provided by the Solo1 sound chip。JP8 is the connector for the Audio functions mentioned below. JP3 : LINE IN Connector PIN NO. -
Page 18: Pci E-Ide Drive Connector
3.4 PCI E-IDE Drive Connector The standard 44-pin header daisy-chain drive connector, CN7, has the following pin assignments. A total of two IDE drives are supported. CN7: IDE Interface Connector PIN NO. DESCRIPTION PIN NO. DESCRIPTION RESET GROUND DATA 7 DATA 8 DATA 6 DATA 9... -
Page 19: Parallel Port Connector
3.5Parallel Port Connector The standard 26-pin flat cable drive connector, CN8, has the following pin assignments. CN8: Parallel Port Connector PIN NO. Description PIN NO. Description STROBE DATA 0 DATA 1 DATA 2 DATA 3 DATA 4 DATA 5 DATA 6 DATA 7 ACKNOWLEDGE BUSY... -
Page 20: The Floppy Disk Drive Connector
3.6 The Floppy Disk Drive Connector The standard 26-pin FDC connector, CN11, has the following pin assignments. CN11 : FDD CONNECTOR PIN NO. DESCRIPTION PIN NO. DESCRIPTION DISK SELECT 1 Read Data# Write Protect# N.C. Track0# N.C. Wgate# Write Data# Step# N.C. -
Page 21: Serial Ports Connectors
3.7 Serial Ports Connectors The HS-1600 offers four high speed NS16C550 compatible UART with Read/Receive 16 byte FIFO serial ports. COM2 can be selected as RS-232 RS-422/485. Refer to the table below. JP2 : RS-232/422/485 Select Description RS-232 RS-422/485 JP4 : COM2 RS-232 Enable/Disable Select COM2 RS-232 Enable RS-232 Disable... - Page 22 CN13 : RS-232 Single (COM1~COM4) CN13 Description CN13 Description DCD1 DCD3 DSR1 DSR3 RTS1 RTS3 CTS1 CTS3 DTR1 DTR3 DCD2 DCD4 DSR2 DSR4 RTS2 RTS4 CTS2 CTS4 DTR2 DTR4...
-
Page 23: Keyboard/Mouse Connectors
3.8 Keyboard/Mouse Connectors The HS-1600 offers two possibilities for PS/2 Keyboard/Mouse connections to an internal 6-pin SMD type connector, CN2. CN2 : 6-pin Keyboard/Mouse Connector PIN NO. Description Mouse Data Mouse CLK Keyboard Data Keyboard CLK... -
Page 24: Vga Crt And Lcd Connectors
3.9 VGA CRT and LCD Connectors The HS-1600 provides two possible connections for the VGA. The 10-pin external VGA connector, CN3 and the internal 40-pin header for the LCD Panel connector, CN12, provide these functions. CN12 : 40-pin Internal LCD Panel Connector PIN NO. - Page 25 Flat Panel Display Interface Mono Mono Color Color Color Color Color Color Color Color Color Color HS-1600 STN- STN- STN- STN- STN-D STN-D 9/12/16 18/24 36-bit 18/24 8-bit 16-bit 8-bit 16-bit 8-bit 8-bit 16-bit 24-bit Name (4bP) (4bP) (4bP) (4bP) SHFCLK: Pixel clock .Shift Clock FLM.VSYNC: First line marker M: Panel AC driver control...
-
Page 26: Ir Connector
CN3 : 9-pin SMD VGA connector PIN NO. Description PIN NO. Description DDC DATA DDC CLK GREEN HSYNC VSYNC BLUE 3.10 IR Connector The HS-1600 provides a 5-pin internal IR communication connector, CN15. The table below shows the pin information. CN15 : 5-pin IR Connector PIN NO. -
Page 27: Usb Ports Connector
3.11 USB Ports Connector The HS-1600 provides two internal 8-pin USB ports connectors. Please refer to the following for the pin information. CN1: 8-pin Header USB Connector CN14 PIN NO. CN14 BD0- BD1+ BD0+ BD1- 3.12 LAN Interface Connector The HS-1600 provides one 8-pin 100 based LAN interface connector. Please refer to the following for the pin information. -
Page 28: Mini Pci Connector
3.13 Mini PCI Connector HS-1600 supports a Mini PCI interface which is very popular in notebook computer’s expansion interface for Modem, Video, LAN, etc. The Mini PCI’s definition is as follows. PC1 : Mini PCI Connector Pin Information PIN NO. PIN NO. - Page 29 C/BE[1]# AD[14] AD[15] AD[13] AD[12] AD[11] AD[10] AD[9] AD[8] C/BE[0]# AD[7] 3.3V 3.3V AD[6] AD[5] AD[4] RESERVED AD[2] AD[3] AD[0] RESERVED_WIP2 AD[1] RESERVED_WIP2 AC_SYNC M66EN AC_SDATA_IN AC_SDATA_OUT AC_BIT_CLK AC_CODEC_IDO# AC_CODEC_ID1# AC_RESET# MOD_AUDIO_MON RESERVED AUDIO_GND SYS_AUDIO_OUT SYS_AUDIO_IN...
-
Page 30: Award Bios Setup
Chapter-4 AWARD BIOS Setup The HS-1600 uses the Award PCI/ISA BIOS for the system configuration. The Award BIOS setup program is designed to provide the maximum flexibility in configuring the system by offering various options which could be selected for end-user requirements. This chapter is written to assist you in the proper usage of these features. -
Page 31: Main Menu
4.1 Main Menu Once you enter the Award BIOS CMOS Setup Utility, the Main Menu will appear on the screen. The Main Menu allows you to select from several setup functions and two exit choices. Use the arrow keys to select among the items and press <Enter>... -
Page 32: Standard Cmos Setup
4.2 Standard CMOS Setup The Standard Setup is used for the basic hardware system configuration. The main function is for Data/Time and Floppy/Hard Disk Drive settings. Please refer to the following screen for the setup. When the IDE hard disk drive you are using is larger than 528MB, please set the HDD mode to LBA mode. -
Page 33: Advanced Bios Features
4.3 Advanced BIOS Features This section allows you to configure your system for the basic operation. You have the opportunity to select the system’s default speed, boot-up sequence, keyboard operation, shadowing and security. CMOS SETUP UTILITY – Copyright © 1984-2001 AWARD SOFTWARE Advanced BIOS Features Virus Warning [Disabled]... -
Page 34: Integrated Peripherals
4.4 Integrated Peripherals The IDE hard drive controllers can support up to two separate hard drives. These drives have a master/slave relationship which is determined by the cabling configuration used to attach them to the controller. Your system supports two IDE controllers--a primary and a secondary--so you can install up to four separate hard disks. - Page 35 ???? : Select Item Enter : Select Esc :+/ -/PU/PD : Value F10 : Save Quit ESC : Exit F1 : General Help : Previous Values :Fail-Safe Defaults F7 :Optimized Defaults Panel# Panel Type 1024*768 Dual Scan STN Color Panel 128*1024 TFT Color Panel 640*480 Dual Scan STN Color Panel 800*600 Dual Scan STN Color Panel...
-
Page 36: Power Management Setup
4.5 Power Management Setup The Power Management Setup allows user to configure the system for saving energy in a most effective way while operating in a manner consistent with his own style of computer use. CMOS SETUP UTILITY – Copyright © 1984-2001 AWARD SOFTWARE Power Management Setup Power Management [User Define]... -
Page 37: Pnp/Pci Configuration Setup
4.6 PnP/PCI Configuration Setup In this section, the PnP/PCI configuration setup allows you to configure the ISA and PCI devices installed in your system by manually or auto. CMOS SETUP UTILITY – Copyright © 1984-2001 AWARD SOFTWARE PnP/PCI Configurations PNP OS Installed [Yes] Item Help Reset Configuration Data... -
Page 38: Software Utilities
Chapter-5 Software Utilities This chapter the detailed information of VGA and LAN function. How to install the configuration is also included. Section include: VGA DRIVER INSTALLATION NETWORK DRIVER INSTALLATION SOUND DRIVER INSTALLATION... -
Page 39: Vga Driver Install For Win98
5.1 VGA DRIVER INSTALL FOR WIN98 1. Click Start, then Setting, then Control Panel. 2. Start the Display applet program. 3. Select the setting page, click the Advanced properties button. 4. Click the change button in the adapter area. 5. Continue to click “Next”. Select Display a list of all drivers in a specific location, so you can select the drivers you want. -
Page 41: Vga Driver Install For Win Nt4.0
5.2 VGA DRIVER INSTALL FOR WIN NT4.0 1. Click the Start button, then go to Settings and click on Control Panel. 2. Click on Display icon to start the Display Properties window. 3. Click on the Settings tab, and then click on Display Type. 4. -
Page 45: Network Driver Install For Win98
5.3 NETWORK DRIVER INSTALL FOR WIN98 1. Click Start, then Settings, in the “Setting” select Control panel. 2. Start the network applet program. 3. In the Network window, click Add. 4. In the Select Network Component Type, select Adapter then click Add. -
Page 49: Network Driver Install For Win Nt4.0
5.4 NETWORK DRIVER INSTALL FOR WIN NT4.0 1. Click the Start button, then go to Settings and click on Control Panel. 2. Click on the Network icon to start the Network window. Click on the Adapters tab, and then click on Add. 3. -
Page 57: Sound Driver Install For Win98
5.5 SOUND DRIVER INSTALL FOR WIN98 1. Click Start, then go to Setting and select Control panel. 2. Click on the Add New Hardware icon to start the applet program. 3. In the window, click “Next”, choose “PCI Multimedia Audio Device”, and click “Next”. -
Page 61: Sound Driver Install For Win Nt4.0
5.6 SOUND DRIVER INSTALL FOR WIN NT4.0 1. Click Start, then go to Setting and select Control panel. 2. Click on the Add New Hardware icon to start the applet program. 3. In the window, click “Next”, choose “PCI Multimedia Audio Device”, and click “Next”.
Need help?
Do you have a question about the Transmeta Crusoe HS-1600 and is the answer not in the manual?
Questions and answers