Before Using For The First Time - Siemens WT47W5W0 Manual

:
warning
Risk of electric shock / risk of fire / damage to
property and equipment!
Modifying or damaging the power cord of
the device can lead to electric shock, short
circuit or fire due to overheating.
The power cord must not be kinked,
crushed or modified and must not come
into contact with heat sources.
:
warning
Risk of fire / damage to property and
equipment!
The use of extension cables or multiple
sockets can lead to fire due to
overheating or short circuits.
Connect the device directly to a properly
installed and earthed socket. Do not use
extension cables, multiple plugs or
multiple couplings.
:
warning
Risk of injury!
Incorrect laying of the hose and power
lines creates the risk of tripping and
injury. Lay hoses and lines so that there is
no risk of tripping.
Set up and connect the device
Connect the device as follows:
1. Insert the mains plug of the device into the
socket provided for this purpose.
2. Check that the power plug is firmly
seated.
Your device is now ready for use.
Caution!
Property and equipment damage
The device contains coolant and can be
damaged if the device is operated
immediately after transport.
Let the device stand for two hours
before starting it up.
A notice: If in doubt, have the device
connected by qualified personnel.
Before first use
Before using the device:
Check the device for visible damage. Do
not operate a damaged device. If you have
any complaints, inform your specialist
dealer or our customer service.
A notice: After it has been properly
installed and connected, the device is ready
for operation. No further action is
necessary.
de
15th