Siemens WT47W5W0 Manual page 39

4th Select any program.
5. on Start pause Ü to press.
6th Wait 5 minutes. Condensation
water is pumped out.
7th Empty the condensate container again.
8th. Switch off the device.
9. Disconnect the device's power plug
from the mains.
The device is now ready for transport.
Caution!
Property and equipment damage
Despite pumping out, there is always some
residual water in the device. Residual water
can leak and cause property damage.
Transport the device upright.
Transporting the device
de
39