Clean And Maintain; To Clean A Device; Cleaning The Moisture Sensor - Siemens WT47W5W0 Manual

D.

Clean and maintain

to clean a device

Wait a minute
:
warning
Risk of death!
The device is operated with electricity.
Contact with live parts poses a risk of
electric shock. Therefore please note:
Turn off the device. Disconnect the
■
device from the mains (pull out the
plug).
Never touch the power plug with wet
■
hands.
Pull the power plug and never the
■
power cord, as the power cord could
be damaged. The device and the
properties of the device must not be
■
technically changed.
Repairs and interventions or a
■
change of the power line (if
necessary) may only be carried out
by customer service or a qualified
electrician.
A replacement power cord is available
■
from customer service.
:
warning
Risk of poisoning!
Solvent-based cleaning agents, such as
benzine, can produce poisonous fumes.
Do not use any cleaning agents that
contain solvents.
:
warning
Risk of electric shock / property and
device damage!
Penetrating moisture can cause a short
circuit.
Do not use high pressure cleaners,
steam jets, hoses or showers to clean
your device.
Clean and maintain
Caution!
Property and equipment damage
Detergents and agents for the pretreatment
of laundry (eg stain removers, pre-wash
sprays, ...) can damage the surface of the
appliance if they come into contact with
them. Therefore please note:
Do not allow these agents to come
■
into contact with the surfaces of
the device.
Only clean the device with water and a
■
soft, damp cloth.
Remove any detergent residue, spray
■
residue, or residue immediately.
Fe
Clean the humidity sensor
A notice: The moisture sensor measures
the degree of moisture in the laundry.
After a long period of use, fine residues of
lime or detergents and care products can
build up. These deposits must be removed
regularly, otherwise the drying result can
be impaired.
1. Open door.
de
33