Siemens WT47W5W0 Manual page 17

1. Turn on a device.
2. Turn the program selector to position 1.
3. on Degree of dryness press and
at the same time turn the program
selector to position 2.
4th Degree of dryness let go.
The setting mode is activated.
Change the signal volume
You can change the signal volume for
information signals (e.g. end of program)
and the button signals on the rotary
selector in the following positions:
2: Volume for the information signals
■
3: Volume for the key signals
■
1.
Activate setting mode.
2.
Program selector to the
turn the desired position.
3.
with Done in + or - the
Set the desired volume (0 = off to 4
= very loud).
Device settings
Activate / deactivate the automatic
switch-off of the device
If the device is not used for a longer period
of time, it can save energy before starting a
program later and after it has ended
switch off automatically. It can be switched
on again at any time by pressing #.
You can activate or deactivate the
automatic switch-off of the device as
follows:
1. Activate setting mode.
2. Turn the program selector to position 4.
3. with Done in + or - activate (On) or
deactivate (Off) the automatic switch-off
of the device.
Exit setting mode
When you have made all the settings,
press # to switch the device off.
The selected settings will be saved and
will take effect the next time the device
is switched on.
de
17th