Table of Contents
Advertisement
:
Warning
Risk of fire/material damage/damage
to the appliance!
The use of extension cords or power
strips may result in fire due to
overheating or short circuiting.
Connect the appliance directly to an
earthed socket that has been correctly
installed. Do not use extension cords,
power strips or multi-way couplers.
:
Warning
Risk of injury!
If the hoses and mains cables are not
correctly routed, they may constitute a
tripping hazard, which may result in
injury.
Route hoses and cables such that they
do not constitute a tripping hazard.
Connect the appliance as follows:
You can change the condensation
1.
drain if you wish. ~ Page 34
Plug the appliance's mains plug into
2.
the designated socket.
Check that the mains plug is in
3.
securely.
Your appliance is now ready to use.
If in doubt, have your appliance
Note:
connected by a qualified professional.
Appliance settings
Before using the appliance for
the first time
Before you switch on the appliance:
Check that there is no visible damage to
the appliance. Do not operate the
appliance if it is damaged. Should you
have any problems, please contact your
specialist dealer or our customer
service.
Once the appliance has been
Note:
properly installed and connected, it is
ready to use. No further steps are
necessary.
2
Appliance settings
Childproof lock
A p p l i a n c e s e t t i n g s
Activating the childproof lock prevents
the settings from being accidentally
changed on the control panel.
Activating/deactivating the childproof
lock:
Press and hold (Childproof lock) w
■
3 sec. for 3 seconds.
The childproof lock will remain
Note:
active, even once the appliance has
been switched off. If you wish to change
settings on the control panel when you
turn on the appliance, you will need to
deactivate the childproof lock.
en
15
Advertisement
Table of Contents
