Advertisement
Motor wires
Ball/downrod
assembly
Ceiling
canopy
Locking pin
Tighten
screws
firmly
Figure 7
INSTALLATION OF SAFETY SUPPORT
An additional safety support is provided to
prevent the fan from falling.
safety cable to the ceiling joist with screw
and washer, as illustrated in Figure 8
Safety Cable
Figure 8
5.
Pin in
Make the Electric Connections
locked
position
WARNING: To avoid possible electrical shock,
be sure electricity is turned off at the main fuse
box before wiring.
1. Disconnect the power and remove the
existing wall plate and switch (Figure 9).
Canopy
cover
2.
Set knobs on the
position.
Collar cover
Hanger pin
3. Make wire connections (Figure 10) and
secure with wire nuts supplied.
Motor collar
Black wire from fan to black wire from
!
speed control
Black wire from speed control to Black
!
wire from the A/C supply source.
White wire from fan to White wire from
!
the A/C supply source.
Connect the fan ground wire (green) to
!
the household ground wire.
Secure the
4. If your outlet box has a ground wire (green or
bare copper) connect the wall transmitter's
ground wire to it; otherwise connect the wall
transmitter's ground wire directly to one of
the screws from the outlet box.
5.
Attach the wall control to the outlet (wall)
box and secure with 2 outlet box screws
(Figure 11).
6. Attach the wall plate over the wall
transmitter and secure with the two screws
provided (Figure 11).
wall control in the 0
Figure 9
Figure 10
Outlet box
Switch
Screws
SUPPLY CIRCUIT
Ground
Conductor
BLACK
FAN 4 SPEED
CONTROL
4
Outlet Box
3
2
Green
1
Ground
0
BLACK
Lead
Ground to
Downrod
Fan
Wall plate
Screws
Advertisement
