Mercedes-Benz C-Class Saloon 2022 Owner's Manual page 347

344 MBUX multimedia system
Opening the socket flap
Press Open socket flap.
#
The socket flap opens and can be closed
again by hand.
Unlocking the charging cable (mode 3 or 4)
When the function is active, the charging cable is
unlocked when the maximum charge level is
reached.
Select Home or Work.
#
Activate or deactivate Unlock charging
#
Activating or deactivating location-based charging
Charging program, home
Select
#
program, work.
Activate or deactivate Select based on loca-
#
tion.
When the function is activated, the vehicle's cur-
rent position is saved as one of the selected
options. When the address is reached again, a
brief query appears as to whether the respective
charging program should be selected.
Activating or deactivating rapid charging
Activate or deactivate the
#
tion.
The Quick charge
mum possible charging capacity at charging sta-
tions up to 60 kW in order to charge the vehicle's
high-voltage battery faster. After the charging
process is complete, the charging capacity in the
"Standard" charging program is again limited to
20 kW in order to protect the high-voltage battery.
cable.
Setting the departure time
The set departure times are used for the vehicle's
Charging
or
pre-entry climate control and for predictions
regarding the approximate state of charge and
range at the time selected. When rapid charging is
deactivated, the charging process start time is
optimised for the next departure time. When rapid
charging is activated, the charging process starts
immediately, irrespective of the next departure
time.
Select Next departure
#
The following charging times can be selected:
individual charging times
R
Quick charge func-
function increases the maxi-
time.
a Week profile
R
Setting an individual departure time
Select Add new timeand set the time.
#
or
Select ´ and adapt an existing departure
#
time.
Setting the repeat days
Select Add new timeand set the time.
#
Mark the relevant weekdays for which the
#
departure time will apply and confirm with
a.
or
Select ´ and edit existing repeat days.
#
Setting a break in the charging process
Up to four breaks in the charging process can be
set during which the vehicle is not charged, even
if it is connected to a charging station.
Select Charging interruptions.
#
Select Add new time and then set and save
#
the times for the beginning and end of the
break.