Mercedes-Benz C-Class Saloon 2022 Owner's Manual page 159

156 Climate control
Switching climate control on/off via the rear oper-
ating unit
Switching on
Press the 4 button.
#
or
Set the airflow to level 1 or higher using but-
#
3 and 5.
tons
or
Press buttons 2, 6, 8 or C.
#
Switching off
Press the 4 button.
#
or
Set the airflow to level 0 using buttons
#
5.
%
rear climate control is switched off via button
4, OFF will be shown on the display.
Switching the A/C function on/off using the air
conditioning control panel
The A/C function heats, cools and dehumidifies
the vehicle's interior air.
Press button ¿.
#
Switch off the A/C function only briefly; other-
wise, the windows may mist up more quickly.
Condensation may drip from the underside of the
vehicle when cooling mode is active. This is not
indicative of a fault.
Calling up the air conditioning menu via the cli-
mate bar or the air conditioning control panel
The air conditioning menu can be called up via the
climate bar. The climate bar is always shown on
the lower edge of the central display.
Climate menu
Select the
#
3 and ditioning bar.
The First row of seats
Jumping directly to the
Select the G fine particle status display.
#
The Air quality menu is opened. An animation
of the automatic air cleaning taking place is
shown.
%
The fine particle status display is on the home
screen next to the temperature display on the
The fine particle value measured in the vehicle
interior can be influenced by the incoming air in
heating mode, especially at a high blower setting.
This can lead to an unrepresentative display of the
fine particle value.
Defrosting the windscreen via the climate bar
Switching on
entry in the air con-
#
menu is opened.
Switching off
Air quality menu
#
or
#
right and it informs you of the current particu-
late levels inside and outside of the vehicle.
The measurement values are shown with the
3
µg/m units (microgrammes per cubic
metre).
Press ¬ on the climate bar on the central
display.
Press ¬, Ã or j on the climate bar
on the central display
set the airflow to 0.