Mercedes-Benz C-Class Saloon 2022 Owner's Manual page 195

192 Driving and parking
The Risk of vehicle rolling away N activated man-
ually No automatic switch to P
in the driver's display.
%
If you then exit the vehicle leaving the key in
the vehicle, the automatic transmission
remains in neutral i.
The park position j is automatically re-engaged
as soon as one of the following conditions is met:
You switch to transmission position h or k.
R
You press the button j.
R
▌Engaging park position P
* NOTE Damage due to engaging park posi-
tion j while the vehicle is rolling
If you shift the transmission into park position
j while the vehicle is rolling, the transmis-
sion may be damaged.
If the vehicle is rolling, do not open a
#
door.
Only engage the park position j when
#
the vehicle is stationary.
Observe the notes on parking the vehicle
#
message appears ( page 220).
/
Depress the brake pedal until the vehicle
#
comes to a standstill.
When the vehicle is stationary, press button
#
j.
When the transmission position display shows
j, the park position is engaged. If the trans-
mission position display j does not appear,
apply the parking brake and secure the vehicle
to prevent it from rolling away.
%
Depending on the situation, it may take a
short time until j is engaged. Therefore,
always pay attention to the transmission posi-
tion display.
Park position j will be engaged automatically if
one of the following conditions is met:
You switch the stationary vehicle off in trans-
R
mission position h or k.
You open the driver's door when the vehicle is
R
stationary in transmission position h or k.
When the vehicle is rolling, you switch if off in
R
transmission position h or k and bring it to
a standstill.
When the vehicle is rolling, you shift to trans-
R
mission position i, bring the vehicle to a
standstill and open the driver's door when the
vehicle is stationary.
Engaging park position j automatically is
R
required by the vehicle.
%
To manoeuvre with an open driver's door,
open the driver's door while the vehicle is sta-
tionary and engage transmission position h
or k again.
▌Engaging drive position D
Depress the brake pedal and push the DIRECT
#
SELECT lever down past the first point of
resistance.
When the automatic transmission is in transmis-
sion position h, it will shift gears automatically.
This depends, among other things, on the follow-
ing factors:
The selected drive program
R
The position of the accelerator pedal
R