Table of Contents
Advertisement
CARE AND MAINTENANCE
It is important to provide the proper preventative maintenance in order to ensure the best
possible performance and reliability of MEER. The following maintenance procedures
should be performed routinely after each use of the equipment.
WARNING:
components.
CAUTION:
training equipment must be carefully considered. Do not use bleach
based disinfectants or disinfectants known to be corrosive, as these
can prematurely age or corrode the product being used. Only use the
recommended disinfectant solutions as shown in the table below.
NOTE: Always follow the guidelines of use, cleaning procedures and safety
data sheets published by the cleaning and disinfectant solution manufactures.
Methods, temperatures, dilution ratios and times can vary. These cleaning
solutions and disinfectants have been developed and are intended for use
with compressed air diving and life support systems and are accompanied
with detailed information.
Always follow your local regulations and cleaning solutions guidelines
regarding disposal.
NOTE: Due to the light weight aluminum first stage, MEER is susceptible to
galvanic corrosion and needs to be rinsed thoroughly after use in salt water.
Disinfectant Solutions
Liquid dishwashing detergent
(diluted with warm water) *Soapy
water is defined as "household"
g r a d e l i q u i d d i s h w a s h i n g
detergent diluted in warm water.
Chemgene HLD4L breathing
apparatus surface disinfectant
solution. Follow manufacturer's
dilution recommendations.
Never use solvents to clean breathing equipment or
Disinfection of products for multi-use applications such as
Applications
General low risk disinfecting "Household Grade"
All around non-corrosive
disinfecting for all plastic
and metallic parts. Shared
training and rental equipment
Source
MediMark Scientific
www.medi-mark.co.uk
15
Advertisement
Table of Contents
