Atop PG59 Series User Manual page 16

eNode Designer
The LCM command structure is summarized in Table 3-2.
Table 3-2 LCM Command Structure
st nd
1 layer 2 layer
Model name
Kernel ver.
AP ver.
1.Overview
LAN 1
LAN 2
1.LAN 1
2.Network
set
2.DNS server1
3.DNS server2
1.Console
3.Server
state
2.Password
protection
3.Ping
1.No
4.Restart
2.Yes
Page | 16
User Manual
th
3rd layer 4 layer
1.LAN status
2.MAC
1.LAN status
2.MAC
1.Static IP Display or change static IP
1.IP config
2.DHCP
2.IP address
3.Net mask
4.Gateway
1.Disable Disable web console
1.Web console
2.Enable
2.Telnet 1.Disable Disable telnet console
console 2.Enable
1.No
1.LCM console
2.Yes
1.No
2.Reset button
2.Yes
1.LAN 1
2.LAN 2
Description
Display model name
Display kernel version
Display AP version
Display status of LAN1
Display MAC address of LAN1
Display status of LAN2
Display MAC address of LAN2
Display dynamic IP or enable DHCP
Display or change LAN1 IP
Display or change subnet mask
Display or change the Gateway IP
Display or change 1st DNS IP address
Display or change 2nd DNS IP address
Enable web console
Enable telnet console
Disable LCM console password protection
Enable and change the password
Disable the reset button password protection
Enable and change the password on reset button
Use "ping" command to check specific IP address for LAN1
Use "ping" command to check specific IP address for LAN2
Cancel restart command
Restart immediately
錯誤! 使用 [常用] 索引標籤
將 Heading 1,Product
Manual 套用到您想要在此
處顯示的文字。