Table of Contents
Advertisement
Specifications
Performance Conditions
AWG410, AWG420 & AWG430 Service Manual
This section contains the AWG400-Series Arbitrary Waveform Generator
specifications. All specifications are guaranteed unless labeled "typical". Typical
specifications are provided for your convenience but are not guaranteed.
Specifications that are marked with the
are checked in the Performance Verification procedures and the page number
referenced to the corresponding performance verification procedures can be
found in the column PV reference page.
The characteristics in the specifications are listed in tables that are divided into
categories. In these tables, the subcategories may also appear in boldface under
the column, Characteristics.
The performance limits in this specification are valid with these conditions:
H The AWG400-Series Arbitrary Waveform Generator must have been
calibrated and adjusted at an ambient temperature between +20
_
+30
C.
H The AWG400-Series Arbitrary Waveform Generator must be in an environ-
ment with temperature, altitude, humidity, and vibration within the operating
limits described in these specifications.
H The AWG400-Series Arbitrary Waveform Generator must have had a
warm-up period of at least 20 minutes.
H The AWG400-Series Arbitrary Waveform Generator must be operating at an
ambient temperature between +10
Warranted characteristics are described in terms of quantifiable performance
limits which are warranted.
n
symbol in the column Characteristics,
_
_
_
C and +40
C (+50
F and +104
_
C and
_
F).
1-3
Advertisement
Table of Contents
