Connecting antennas
Connecting rod antennas
To connect the supplied rod antennas:
►
Connect the antennas to the two antenna inputs on the re-
▷
ceiver as shown in the figure.
Slightly angle the antennas to the left and right as shown in
▷
the figure.
Connecting remote antennas
To connect remote antennas:
►
Connect the antennas to the two antenna inputs on the re-
▷
ceiver as shown in the figure.
Observe the specified minimum spacing.
▷
*Recommended antennas:
• ADP UHF | 470 – 1075 MHz
• AD 1800 | 1400 – 2400 MHz
If you are using more than one receiver, we recommend
using remote antennas and possibly the EW-D ASA anten-
na splitter („EW-D ASA antenna splitter").
EW-D EM rack receiver
37