Sennheiser Evolution Wireless Digital Series Instruction Manual page 154

120 Hz
Press the UP or DOWN button to set the desired value.
▷
Press the SET button to confirm your selection.
▷
If you set a value for the channel's low cut f lter using the
Low Cut menu item on the receiver and then synchronize
the receiving channel with the transmitter, the value en-
tered in the transmitter is overwritten by the value set in
the receiver.
on the receiver) to suit input signals of different volumes.
• Setting range: -12 dB to +6 dB in increments of 1 dB
Press the UP or DOWN button to set the desired value.
▷
Press the SET button to confirm your selection.
▷
If you set a value for the channel in the Trim menu item on
the receiver and then synchronize the receiving channel
with the transmitter, the value entered in the transmitter
is overwritten with the value entered in the receiver.
EW-DX SKM | EW-DX SKM-S handheld transmitter
Low Cut menu item
In this menu item, you can adjust the
value for the low cut filter.
•Setting range: 60 Hz, 80 Hz, 100 Hz,
Trim menu item
In this menu item, you can adjust the au-
dio level of the transmitter as well as the
gain of the wireless link (can be set only
153