Sennheiser Evolution Wireless Digital Series Instruction Manual page 117

Ch 1 / Ch 2 -> Low Cut menu item
In the Low Cut menu item, you can set the value of the low cut
filter for the respective channel.
• Setting range:
• for EW-DX SK | EW-DX SK 3-PIN: Off, 30 Hz, 60 Hz, 80 Hz,
100 Hz, 120 Hz
• for EW-DX SKM | EW-DX SKM-S: 60 Hz, 80 Hz, 100 Hz,
120 Hz
To open the Low Cut menu item:
In the menu, navigate to the Low Cut menu item for the de-
▷
sired channel.
Press the jog dial to open the menu.
▷
The following view is displayed:
Turn the jog dial to set the desired value.
▷
Press the jog dial to save your setting.
▷
or
Press the ESC button to cancel the entry without saving the
▷
setting.
For the set value to be applied to the received transmitter,
you must synchronize the channel („Connecting to the
EW-DX EM 2 receiver / synchronizing the EW-DX EM 2").
EW-DX EM 2 rack receiver
116