Sennheiser Evolution Wireless Digital Series Instruction Manual page 86

Connecting/disconnecting the receiver to/
from the power supply system
You can operate the receiver using either the included power
supply unit or with Power over Ethernet (PoE IEEE 802.3af
Class 0). Please refer to the following information.
Power from the power supply unit
If using a power supply unit, use only the power supply unit in-
cluded with the device. It is designed for your receiver and en-
sures safe operation.
You will f i nd t he po w er supp l y un i t and t he coun tr y adap t -
ers in the packaging under the tray.
To connect the receiver to the power supply system:
Insert the plug of the power supply unit into the DC in sock-
▷
et on the receiver.
Pass the cable of the power supply unit through the strain
▷
relief.
Slide the supplied country adapter onto the power supply
▷
unit.
Plug the power supply unit into the wall socket.
▷
EW-DX EM 2 rack receiver
85