Connecting/disconnecting the receiver to/
from the power supply system
Only use the supplied power supply unit. It is designed for your
receiver and ensures safe operation.
You will f i nd t he po w er supp l y un i t and t he coun tr y adap t -
ers in the packaging under the tray:
To connect the receiver to the power supply system:
Insert the plug of the power supply unit into the DC in sock-
▷
et on the receiver.
Pass the cable of the power supply unit through the strain
▷
relief.
Slide the supplied country adapter onto the power supply
▷
unit.
Plug the power supply unit into the wall socket.
▷
To completely disconnect the receiver from the power supply
system:
Unplug the power supply unit from the wall socket.
▷
Unplug the power supply unit from the DC in socket on the
▷
receiver.
EW-D EM rack receiver
36