Sennheiser Evolution Wireless Digital Series Instruction Manual page 50

Opening the menu and navigating the menu items
To open the menu:
Press the SET button.
▷
The first menu item GAIN flashes.
►
To navigate the menu items:
Press the UP and DOWN buttons.
▷
The currently active menu item flashes.
►
To open a menu item:
Navigate to the desired menu item until it flashes.
▷
Press the SET button to open the selected menu item.
▷
GAIN menu item
Under the GAIN menu item, you can set the level of the audio
signal coming from the coupled transmitter (e.g. vocals via
EW-D SKM-S or guitar via EW-D SK).
Open the GAIN menu item.
▷
The item flashes on the display as follows.
►
Press the UP or DOWN button to adjust the value.
▷
Make sure that the level indicator AF on the display is not
too high. The LINK LED flashes yellow when the signal is
overdriven.
Press the SET button to save the set value.
▷
Recommended settings for a unity gain link:
Unity gain refers to the conf i gur ati on w her e t he aud i o s i g -
nal arriving at a device leaves the device with the same
level.
Example: If you are using an EW-D wireless link instead of
a guitar cable, with unity gain settings, the volume of the
EW-D EM rack receiver
49