Table of Contents
Advertisement
®
Junos
Pulse Gateway Hardware Guide
Related
Documentation
Junos Pulse Gateway Cabinet Requirements
32
Table 20: Junos Pulse Gateway Rack Requirements (continued)
Rack
Requirement
Specification
Rack requirements
The outer edges of the mounting brackets extend the width of either
chassis to 19-in. (48.3-cm).
The front of the chassis extends approximately 0.50-in. (1.27-cm) beyond
the mounting ears.
The maximum permissible ambient temperature when two devices are
placed side by side in a 19-in. rack is 104 °F or 40 °C.
Spacing of
The holes within each rack set are spaced at 1-U [1.75-in. (4.5 cm)]. The
mounting bracket
device can be mounted in any rack that provides holes or hole patterns
and flange holes
spaced at 1-U (1.75-in., or 4.5-cm) increments.
The mounting brackets and front-mount flanges used to attach the
chassis to a rack are designed to fasten to holes spaced at rack distances
of 1-U (1.75 in., or 4.5-cm).
The mounting holes in the mounting brackets provided with the device
are spaced 1.25 in. (3.2 cm) apart (top and bottom mounting holes).
Connection to the
Always secure the rack in which you are installing the services gateway to
building structure
the structure of the building. If your geographical area is subject to
earthquakes, bolt the rack to the floor. For maximum stability, also secure
the rack to ceiling brackets.
Clearance Requirements for Airflow in and Hardware Maintenance of the Junos Pulse
Gateway on page 33
Installing the Junos Pulse Gateway in a Rack on page 51
You can mount the Junos Pulse Gateway (except for the MAG2600) in a cabinet that
contains a 19-in rack. There are requirements for:
Cabinet size
Cabinet clearance
Cabinet airflow
Table 21 on page 33
provides the cabinet requirements and specifications for the Junos
Pulse Gateway.
Copyright © 2014, Juniper Networks, Inc.
Advertisement
Table of Contents
