Page 1
Technical help is available: Monday - Friday from 07:00 - 19:00 (GMT) Saturday from 09:00 - 13:00 (GMT) Documentation on all Paxton products can be found on our website - http://www.paxton.co.uk/ Bench test guide What’s in the box? Documentation...
Page 2
The following pages contain full instruction issued with the PROXIMITY LCD reader and the Net2Air USB dongle. There are also details on the LCD reader image uploader. These include the following procedures: - Mounting the LCD reader. - Commissioning. - Default images. - Creating and customising your own images.
01273 811011 support@paxton.co.uk Technical help is available: Monday - Friday from 07:00 - 19:00 (GMT) Saturday from 09:00 - 13:00 (GMT) Documentation on all Paxton products can be found on our website - http://www.paxton.co.uk/ Suitability Security-sensitive doors Wet environments 300mm...
RJ45 plug and stripping back the wires in the cable. replace it with this module. Further information on how to purchase Installer Tools is available at: http://paxton.info/841 Cable extensions Readers can be extended using Belden CR9540 10-core overall screened cable to a maximum of 100 metres.
This program can be download from the website at < http://paxton.info/1521 > NOTE: This is an uploader utility and does not display the current image that is displayed on any particular reader.
Image selection The LCD reader will hold 4 images. These are selected automatically by the reader’s LED control wires. The ‘Present token’ image will display unless one of the three LED wires (Brown, Amber or Green) is individually active (0v). In that case the corresponding image (Access Granted, Access Denied or Enter PIN) will display. The supplied images are shown below.
Once you have the correct image displayed, click on ‘Completed’ to return to the main updater program. The modified image can be saved via the ‘File’ menu. Image upload Select the LCD reader from the list of units detected and check that the image type is the correct one to be updated. Check that the image orientation is correct and then click on the ‘Send Image’...
LCD reader removal tool This product is not suitable for retail sale. All warranties are invalid if this product is not installed by a competent person. The declaration of conformity is available on request. Contact details are provided at: http://paxton.info/596 Page 8...
Page 9
This USB dongle enables PC software to exchange data with Paxton devices that communicate using Net2Air wireless technology: Plug the device into a spare USB port on the PC. Open or restart any Paxton applications and the unit will register automatically in the software.
Page 10
Monday - Friday from 07:00 - 19:00 (GMT) Saturday from 09:00 - 13:00 (GMT) Documentation on all Paxton products can be found on our website - http://www.paxton.co.uk/ LCD Reader image upload To upload new images to your LCD reader, you will...
Need help?
Do you have a question about the Ins-30130 and is the answer not in the manual?
Questions and answers